|
|
RC18T
Feb 13, 2005 15:00:29 GMT -5
Post by UberRacer on Feb 13, 2005 15:00:29 GMT -5
Figured I'd start an RC18T thread while watching qualifying for the Daytona 500.
Those CVD's I got are pretty nice. I was a bit suprised by the pin not being held in with a setscrew but then realized that the bearing will hold it in. Took me a minute since I don't actually have the truck yet.
Ryan, have you had a problem with the bottom caps on the shocks falling off and the oil spilling out?
|
|
|
|
RC18T
Feb 13, 2005 16:11:29 GMT -5
Post by Ryan on Feb 13, 2005 16:11:29 GMT -5
shock bottoms fallin off yes but rarly. oil i havnt lost n e yet.
|
|
|
|
RC18T
Feb 17, 2005 18:51:55 GMT -5
Post by UberRacer on Feb 17, 2005 18:51:55 GMT -5
The diffs need tightening out of the box, don't they?
|
|
|
|
RC18T
Feb 17, 2005 18:57:03 GMT -5
Post by Ryan on Feb 17, 2005 18:57:03 GMT -5
no but if u like to check the diffs u tighten the diff up all the way and loosen it a half a turn from there and thats is wat it shud b set at.
|
|
|
|
RC18T
Feb 17, 2005 19:50:24 GMT -5
Post by Scott on Feb 17, 2005 19:50:24 GMT -5
Hey Pat... i've had a problem with the bottoms caps falling off my 18t
|
|
|
|
RC18T
Feb 17, 2005 20:18:44 GMT -5
Post by UberRacer on Feb 17, 2005 20:18:44 GMT -5
I found some of those outdrive saver rings sold on ebay for $5 at lowes for 60 cents.
They are 5/16" compression fittings found in the plumbing section.
|
|
|
|
RC18T
Feb 17, 2005 20:58:03 GMT -5
Post by Ryan on Feb 17, 2005 20:58:03 GMT -5
do they have the little notch thing on the rings at lowes?
|
|
|
|
RC18T
Feb 17, 2005 21:09:34 GMT -5
Post by UberRacer on Feb 17, 2005 21:09:34 GMT -5
|
|
|
|
RC18T
Feb 17, 2005 21:22:18 GMT -5
Post by Ryan on Feb 17, 2005 21:22:18 GMT -5
sry i was thinkin bout somethin else. i got those for free. talk to paul he'll make u some
|
|
|
|
RC18T
Feb 21, 2005 15:21:04 GMT -5
Post by UberRacer on Feb 21, 2005 15:21:04 GMT -5
|
|
|
|
RC18T
Feb 21, 2005 16:26:36 GMT -5
Post by Ryan on Feb 21, 2005 16:26:36 GMT -5
those r awsome. t they sprinters or sumthin. that would be a lot of fun to do.
|
|
|
|
RC18T
Mar 2, 2005 18:42:09 GMT -5
Post by UberRacer on Mar 2, 2005 18:42:09 GMT -5
Where does everyone mount their personal transponder?
|
|
|
|
RC18T
Mar 2, 2005 19:23:17 GMT -5
Post by Ryan on Mar 2, 2005 19:23:17 GMT -5
where evr u can really. i got mine on my reciever
|
|
|
|
RC18T
Mar 11, 2005 12:37:34 GMT -5
Post by UberRacer on Mar 11, 2005 12:37:34 GMT -5
I just got the motor heatsink off ebay for $8 yippie
|
|
